LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 101 (Hybrid Vehicle Control System (P311) (Hybrid) (Diagnostic Codes (P0AA1-233 - U0424-537)) >> Hybrid Control System >> DTC P3004-133: Power Cable Malfunction >> Procedure

DTC P3004-133: Power Cable Malfunction: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC OUTPUT (HV) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
    4. Check if DTCs are output.

      Result

      DTCs other than P3004-133 are output.

    YES → GO TO  DIAGNOSTIC TROUBLE CODE CHART  DTC CHART 

    NO → See step   2 

  2. REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL 
scientia non olet · About LEMON Manuals