LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 100 (Hybrid Vehicle Control System (P311) (Hybrid) (Diagnostic Codes (P0A78-284 - P0AA1-231)) >> Hybrid Control System >> DTC P0A92-261: Hybrid Generator Performance >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

The MG ECU monitors MG1. If the MG ECU detects a reduction in the magnetic force of MG1 or an in-phase short, it interprets this as an MG1 failure. The hybrid vehicle control ECU will illuminate the MIL and set a DTC.

scientia non olet · About LEMON Manuals