LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 100 (Hybrid Vehicle Control System (P311) (Hybrid) (Diagnostic Codes (P0A78-284 - P0AA1-231)) >> Hybrid Control System >> DTC P0A7A-344: Generator Inverter Performance >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

If the difference between the requested MG1 torque and the actual MG1 torque exceeds a predetermined value, the MG ECU determines that there is a malfunction in the execution or monitoring of the MG1 torque. Then, the hybrid vehicle control ECU will illuminate the MIL and set a DTC.

scientia non olet · About LEMON Manuals