DTC P0A78-510: Drive Motor "A" Inverter Performance: Description
WARNING: This page is about a different variant/trim than selected.
For a description of the inverter. Refer to DTC P0A78-266: Drive Motor "A" Inverter Performance; DTC P0A78-267: Drive Motor "A" Inverter Performance .
Upon receiving a motor gate shutdown signal from the MG ECU, the inverter forcibly stops MG2 by turning off all power transistors that are actuating MG2.
The MG ECU monitors the motor gate shutdown signal line and detects malfunctions.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A78 | 510 | Motor inverter gate malfunction | Inverter with converter assembly |
HINT:
- If DTC P0A78-510 is output, the hybrid system cannot be restarted until the DTC is cleared.
- If the malfunction is not reproduced, leave the vehicle for 1 minute with the shift lever in the N position in order to easily reproduce the malfunction.