DTC B1000/31: Center Airbag Sensor Assembly Malfunction: Procedure
WARNING: This page is about a different car, the 2013 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Check for DTCs. Refer to DTC CHECK / CLEAR
.
Result
Result Proceed to DTC B1000/31 is output A DTC B1000/31 and other DTCs are output B NOTE:If only DTC B1000/31 is output, do not clear the DTCs, replace the airbag sensor assembly.
HINT:
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
B → See step 2
A → See step 3
- Check for DTCs. Refer to DTC CHECK / CLEAR
.
- GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART
- REPLACE AIRBAG SENSOR ASSEMBLY. Refer to REMOVAL