LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Automatic Transmission - U660E - (Diagnostic Codes & Circuit Tests) (Except Hybrid)) >> Automatic Transaxle System >> DTC P0778: Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2) >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Perform the universal trip to clear permanent DTCs. Refer to DTC CHECK / CLEAR .

HINT: 

The shift solenoid valve SL2 is turned on or off automatically when the shift lever is in the D position:

TCM command gearshift 1st 2nd 3rd 4th 5th 6th
Shift solenoid valve SL2 OFF OFF OFF ON ON ON