LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Automatic Transmission - U660E - (Diagnostic Codes & Circuit Tests) (Except Hybrid)) >> Automatic Transaxle System >> DTC P0778: Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2) >> Description

DTC P0778: Pressure Control Solenoid "B" Electrical (Shift Solenoid Valve SL2): Description

WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

Shifting from 1st to 6th is performed in combination with "ON" and "OFF" operation of the shift solenoid valves SL1, SL2, SL3, SL4 and SL which is controlled by the TCM. If an open or short circuit occurs in any of the shift solenoid valves, the TCM controls the remaining normal shift solenoid valve to allow the vehicle to be operated smoothly. Refer to FAIL-SAFE CHART .

DTC No. DTC Detection Condition Trouble Area
P0778 The TCM checks for an open or short in the shift solenoid valve SL2 circuit while driving and shifting gears. (1-trip detection logic)
  • Output signal duty equals to 100%.

    (NOTE: SL2 output signal duty is less than 100% under normal condition.)

  • Open or short in shift solenoid valve SL2 circuit
  • Shift solenoid valve SL2
  • TCM