Typical Enabling Conditions
WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
P0715:
| Battery voltage | 8 V or more |
| Engine switch | on (IG) |
| Starter | OFF |
P0717:
| The monitor will run whenever this DTC is not present. | P0500 (VSS) P0748, P0778, P0798 (Shift solenoid valve (range)) |
| Shift change | Shift change is completed before starting next shift change operation |
| TCM selected gear | 2nd, 3rd, 4th, 5th or 6th |
| Output shaft RPM | 1,000 RPM or more |
| STAR switch | OFF |
| R switch | OFF |
| Engine | Running |
| Battery voltage | 8 V or more |
| Engine switch | on (IG) |
| Starter | OFF |