DTC P0500: Vehicle Speed Sensor "A": Description
WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
The speed sensors detect the wheel speed and sends the appropriate signals to the skid control ECU. The skid control ECU converts these wheel speed signals into a 4-pulse signal and outputs it to the TCM via the combination meter. The TCM determines the vehicle speed based on the frequency of these pulse signals.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0500 | When the ECT sensor is normal and the counter gear speed is 300 RPM or more, the vehicle speed signal is not input for 2 seconds or more. |
|