Typical Enabling Conditions
WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
ALL:
| Monitor runs whenever following DTCs are not present: | None |
CASE 1:
| Ignition switch | ON |
| Engine | Running |
| Battery voltage | 8 V or more |
| Starter | OFF |
CASE 2:
| Internal engine OFF timer (elapsed time from engine stop) | Less than 30 minutes |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
CASE 3:
| Internal engine OFF timer (elapsed time from engine stop) | 40 minutes or more |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |