DTC P0724: Brake Switch "B" Circuit High: Description
WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
The purpose of this circuit is to prevent the engine from stalling, while driving in lock-up condition, when brakes are suddenly applied.
When the brake pedal is depressed, this switch sends a signal to the ECM. Then the ECM cancels the operation of the lock-up clutch while braking is in progress.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0724 | Stop light switch remains on even when vehicle is driven in GO (18.65 mph (30 km/h) or more) and STOP (less than 1.86 mph (3 km/h)) pattern 5 times (2 trip detection logic) |
|