Typical Enabling Conditions
WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
ALL:
| The monitor will run whenever this DTC is not present. | None |
| Ignition switch | ON |
| Battery voltage | 10.5 V or more |
| Starter | OFF |
CONDITION (C):
| One of the following conditions is met: | Condition (a), (b), (c) or (d) |
| (a) Park Neutral position switch | ON |
| (b) Park position switch | ON |
| (c) Neutral position switch | ON |
| (d) R range position switch | ON |