LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Engine Control (SFI) System (2GR-FE) (Diagnostic Codes (P0443-U0101) & Circuit Tests) (Except Hybrid)) >> SFI System >> DTC P0630: VIN not Programmed or Mismatch - ECM / PCM >> Description

DTC P0630: VIN not Programmed or Mismatch - ECM / PCM: Description

WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the Engine Control Module (ECM) or the input VIN is not accurate. Input the VIN with the Techstream.

DTC No. DTC Detection Condition Trouble Area
P0630
  • VIN not stored in ECM
  • Input VIN in ECM not accurate

    (1 trip detection logic)

ECM