Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTIONAL CHECK:
| Either of the following conditions 1 or 2 is met: | - |
| 1. Frequency that both of following conditions (a) and (b) are met: | 5 time or more |
| (a) Engine speed - target engine speed | Less than -100 RPM, or more than 200 RPM (A/C ON or NSW ON) |
| (b) Vehicle condition | Stop after vehicle was driven by 6.25 mph (10 km/h) or more |
| 2. Frequency that both of following conditions (a) and (b) are met: | Once |
| (a) Engine speed - target engine speed | Less than -100 RPM, or more than 150 RPM (A/C OFF or NSW OFF) |
| (b) ISC flow rate learning value | 1.3 L/sec. or less. or 8.5 L/sec. or more |