DOOR CONTROL TRANSMITTER (w/o Smart Key System): Installation: Installation

INSTALL TRANSMITTER BATTERY
1. Install the transmitter battery.
  1. Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.
    
    Fig 1: Identifying Transmitter Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:
    Be sure that the positive and negative sides of the transmitter battery are positioned correctly.
    
    Be careful not to bend the terminals of the transmitter battery during installation.
    
    Keep the interior of the transmitter case free of dust, water, and oil.
2. Install the door control transmitter module into the transmitter housing case.
  
  Fig 2: Installing Door Control Transmitter Module Into Transmitter Housing Case
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the transmitter housing cover securely onto the transmitter housing case.
  
  Fig 3: Installing Transmitter Housing Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  After the installation, press one of the transmitter switches and check that the LED illuminates.