LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 107 (Hybrid Battery Control (Hybrid) (Diagnostic Codes (P0A1F-123 - U029A-123)) >> Hybrid Battery System >> DTC P0A80-123: Replace Hybrid Battery Pack >> Procedure

DTC P0A80-123: Replace Hybrid Battery Pack: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FOR DTCS (DTC P0A1F-123 IS OUTPUT) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
    4. Check if DTCs are output.

      Result

      DTC P0A1F-123 is output.

    YES → GO TO INSPECTION PROCEDURE RELEVANT TO OUTPUT DTC 

    NO: Go to next step 

  2. CHECK BATTERY SMART UNIT See step   2 

    B → See step   3 

    A → See step   4 

  3. REPLACE HV BATTERY. Refer to  REMOVAL 
  4. REPLACE BATTERY SMART UNIT. Refer to  REMOVAL 
scientia non olet · About LEMON Manuals