DTC P2808: Pressure Control Solenoid "G" Performance (Shift Solenoid Valve SL4): Description
WARNING: This page is about a different car, the 2013 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
The TCM uses the vehicle speed signal and signals from the transmission speed sensors (NC, NT) to detect the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear).
Then the TCM compares the actual gear with the shift schedule in the TCM memory to detect mechanical problems of the shift solenoid valves and valve body.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P2808 | The engine revs freely when 3rd or 5th gear is commanded. (2-trip detection logic) When any of the following is detected. In addition, the condition that 4th gear is engaged when 4th gear is commanded occurs twice. (2-trip detection logic)
|
|