LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 436 (Automatic Transaxle (U660E) (Diagnostic Codes & Circuit Tests) (Except Hybrid)) >> Automatic Transaxle System >> DTC P0748: Pressure Control Solenoid "A" Electrical (Shift Solenoid Valve SL1) >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2013 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Perform the universal trip to clear permanent DTCs. Refer to DTC CHECK / CLEAR .

HINT: 

The following table shows normal operation of the shift solenoid valve SL1 when the shift lever is in D:

TCM commanded gear 1st 2nd 3rd 4th 5th 6th
Shift solenoid valve SL1 ON ON ON ON OFF OFF