LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 436 (Automatic Transaxle (U660E) (Diagnostic Codes & Circuit Tests) (Except Hybrid)) >> Automatic Transaxle System >> DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input) >> Description

DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input): Description

WARNING: This page is about a different car, the 2013 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

The park/neutral position switch assembly detects the shift lever position and sends signals to the TCM.

DTC No. DTC Detection Condition Trouble Area
P0705 (A) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)
  • NSW input signal is ON.
  • R input signal is ON.
  • D input signal is ON.

(B) All switches are OFF simultaneously for NSW, R and D.
  • Open or short in park/neutral position switch assembly circuit
  • Park/neutral position switch assembly
  • TCM