LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Meter / Gauge / Display (Diagnostic Codes & Symptom Tests) (Except Hybrid)) >> Meter / Gauge System >> DTC B1507: Open in Turn Signal Circuit; DTC B1508: Short in Turn Signal / Hazard Flasher Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2013 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Inspect the bulbs for circuits related to this system before performing the following inspection procedure.