LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Camry Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Automatic Transmission - U660E - (Diagnostic Codes & Circuit Tests) (Except Hybrid)) >> Automatic Transaxle System >> DTC P0798: Pressure Control Solenoid "C" Electrical (Shift Solenoid Valve SL3) >> Description

DTC P0798: Pressure Control Solenoid "C" Electrical (Shift Solenoid Valve SL3): Description

WARNING: This page is about a different car, the 2010 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

Shifting gears from 1st through 5th is performed in combination with "ON" and "OFF" operation of the shift solenoid valves SL1, SL2, SL3 and SL4 which are controlled by the TCM. If an open or short circuit occurs in any of the shift solenoid valves, the TCM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Fail safe function).

DTC No. DTC Detecting Condition Trouble Area
P0798 The TCM checks for an open or short in the shift solenoid valve SL3 circuit while driving and shifting gears. (1-trip detection logic)
  • Output signal duty equals to 100%.

    (NOTE: SL3 output signal duty is less than 100% under normal condition.)

  • Open or short in shift solenoid valve SL3 circuit
  • Shift solenoid valve SL3
  • TCM