Fail-Safe Chart

ENGINE COOLANT TEMPERATURE GAUGE:

Condition	Response	Recovery
Engine coolant temperature data is interrupted for 5 seconds.	The gauge needle indicates below "C".	Engine coolant temperature data is received.

SHIFT INDICATOR:

Condition	Response	Recovery
"P to D" data is interrupted for 3 seconds.	All indicator lights go off.	Normal data is received.
"S" data is interrupted for 3 seconds.	The "S" indicator light goes off.	Normal data is received.

GEAR POSITION INDICATOR (1 TO 6):

Condition	Response	Recovery
Gear position data is interrupted for 3 seconds or a malfunction signal is received.	The indicator light goes off.	Normal data is received.

ABS, BA, TRAC, AND VSC:

Condition	Response	Recovery
ABS, brake, VSC, or slip data is interrupted for 1 second.	The warning light comes on.	Normal data is received.

DOOR:

Condition	Response	Recovery
Regular data is interrupted.	The data received most recently remains indicated.	Normal data is received.

HEAD*1:

Condition	Response	Recovery
Regular data is interrupted.	The data received most recently remains indicated.	Normal data is received.

TAIL*2:

Condition	Response	Recovery
Regular data is interrupted.	The data received most recently remains indicated.	Normal data is received.

BEAM:

Condition	Response	Recovery
Regular data is interrupted.	The indicator light goes off.	Normal data is received.

KEY:

Condition	Response	Recovery
Regular data is interrupted.	The indicator light goes off.	Normal data is received.

CRUISE INFORMATION:

Condition	Response	Recovery
Cruise information data is interrupted for 60 seconds.	The display becomes blank (only measurement units are displayed).	Normal data is received.

ILLUMINATION:

Condition	Response	Recovery
The illumination data is interrupted for 10 seconds or abnormal data is received.	The display remains in daytime mode.	Normal data is received.

*1: for U.S.A.

*2: except U.S.A.