LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> Avalon Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel (Service Information) >> Instrument Panel Safety Pad >> Reassembly (From 12/2010) >> Reassembly

Reassembly (From 12/2010): Reassembly

  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
    1. Engage the 2 claws to install the automatic light control sensor as shown in the illustration.
      Fig 1: Identifying Automatic Light Control Sensor Claw
      GTY124752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)  . Refer to INSTALLATION - Step 1
  3. INSTALL ANTENNA CORD SUB-ASSEMBLY  . Refer to INSTALLATION - Step 3
  4. INSTALL NO. 3 INSTRUMENT PANEL WIRE 
    1. Engage each clamp.
      Fig 2: Identifying No. 3 Instrument Panel Wire Connector Location
      GTY295296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector to install the No. 3 instrument panel wire.
  5. INSTALL GLOVE BOX LIGHT ASSEMBLY 
    1. Engage the 2 claws to install the glove box light assembly.
      Fig 3: Identifying Glove Box Light Assembly Claw
      GTY307591Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY 
  7. INSTALL CENTER INSTRUMENT PANEL BRACKET SUB-ASSEMBLY 
    1. Install the center instrument panel bracket sub-assembly with the 2 screws <E>.
      Fig 4: Locating Center Instrument Panel Bracket Sub-Assembly Screws
      GTY295057Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL SIDE DEFROSTER NOZZLE RH 
    1. Engage the 6 claws to install the side defroster nozzle RH.
      Fig 5: Locating Side Defroster Nozzle RH Claws
      GTY305222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL SIDE DEFROSTER NOZZLE LH 
    1. Engage the 6 claws to install the side defroster nozzle LH.
      Fig 6: Locating Side Defroster Nozzle LH Claws
      GTY304572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the No. 2 heater register duct with the 4 screws <E>.
      Fig 7: Locating No. 2 Heater To Register Duct Screws
      GTY295210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the defroster nozzle assembly with the 3 screws <E>.
      Fig 8: Locating Defroster Nozzle Assembly Screws
      GTY295442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 
    1. Install the No. 2 side defroster nozzle duct with the screw <E>.
      Fig 9: Locating No. 2 Side Defroster Nozzle Duct Screw
      GTY295383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT 
    1. Install the No. 1 side defroster nozzle duct with the screw <E>.
      Fig 10: Locating No. 1 Side Defroster Nozzle Duct Screw
      GTY295596Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the No. 3 heater to register duct with the 3 screws <E>.
      Fig 11: Locating No. 3 Heater To Register Duct Screws
      GTY305480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the clamp.
  15. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the No. 1 heater to register duct with the 3 screws <E>.
      Fig 12: Locating No. 1 Heater To Register Duct Screws
      GTY294527Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL NO. 1 INSTRUMENT PANEL PIN 
    1. Install the 2 No. 1 instrument panel pins with the 2 screws <E>.
      Fig 13: Identifying No. 1 Instrument Panel Pins Location
      GTY305234Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals