Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE:

The Techstream is required to conduct the following diagnostic troubleshooting procedure.

HINT:

Using the Techstream to monitor results enables the EVAP (Evaporative Emission) system to be confirmed.
Read freeze frame data using the Techstream. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was running or stopped, whether the engine was warmed up or not, whether the air fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.