Charge Warning Light Comes ON while Driving: Procedure

1. Check the lock function with the pulley installed in the vehicle.
   1. Visually check that the rotor in the generator operates with the engine running.
2. Check the lock function with the pulley removed from the vehicle.
   1. Remove the generator pulley cap. Using SST, hold the generator rotor.
   2. Turn the clutch pulley clockwise and check that the outer ring locks.
      Fig 1: Inspecting Generator Clutch Pulley

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      The outer ring locks.

   • SST: 09820-63021 

NG → See step   3 

OK: Go to next step 

1. Start the engine and visually check for looseness of the clutch pulley.

   OK

   The clutch pulley is not loose.

NG → TIGHTEN GENERATOR CLUTCH PULLEY TO THE SPECIFIED TORQUE 

OK → See step   4