Speed Sensor: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL SPEED SENSOR
1. Coat a new O-ring with ATF WS and install it to the speed sensor.
  
  Fig 1: Identifying O-Ring And Transmission Revolution Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the speed sensor with the bolt.
  
  Fig 2: Locating Speed Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the speed sensor connector.
INSTALL AIR CLEANER CASE . Refer to INSTALLATION - Step 62
INSTALL AIR CLEANER CAP SUB-ASSEMBLY . Refer to INSTALLATION - Step 2
INSTALL NO. 2 CYLINDER HEAD COVER . Refer to INSTALLATION - Step 85