How To Proceed With Troubleshooting

VEHICLE BROUGHT TO WORKSHOP
NEXT: Go to next step
CUSTOMER PROBLEM ANALYSIS
NEXT: Go to next step

CHECK CAN COMMUNICATION SYSTEM

Check for DTC output.

HINT:

Refer to DIAGNOSIS SYSTEM .

Result

Result	Proceed to
No CAN DTC output	A
CAN DTC output	B

B → GO TO CAN COMMUNICATION SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART

A: Go to next step

PROBLEM SYMPTOM CONFIRMATION
NEXT: Go to next step
SYMPTOM SIMULATION
NEXT: Go to next step
PROBLEM SYMPTOMS TABLE
HINT:

Refer to HOW TO PROCEED WITH TROUBLESHOOTING .

NEXT: Go to next step
CIRCUIT INSPECTION
NEXT: Go to next step
REPAIR OR REPLACE
NEXT: Go to next step
CONFIRMATION TEST
NEXT → END