LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2010 >> Corolla Base, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Vehicle Stability Control (VSC) (Diagnostic Codes (C0226-U0126) & Symptom Tests) >> Vehicle Stability Control System >> DTC C1422: Master Cylinder Pressure Sensor Zero Point High Malfunction >> Inspection Procedure

Inspection Procedure

NOTE:

When replacing the brake actuator assembly, perform zero point calibration. Refer to CALIBRATION .

HINT: 

When C1425 is output together with C1422, inspect and repair the trouble areas indicated by C1425 first. Refer to DTC C1425: Open in Stop Light Switch Circuit .

scientia non olet · About LEMON Manuals