Differential Pinion Seal: Remove & Replace
WARNING: This page is about the Tundra Base, 4.0 U, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| RWD, Rear Axle,w/Single Piece Driveline | 1.2 | 1.0 | B | |
| RWD, Rear Axle,w/Two Piece Driveline | 1.4 | 1.0 | B | |
| Combination Procedure: SPACER CRUSH SLEEVE: Replace: | ||||
| Rear Axle | 3.9 | B | ||