Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | None |
| Engine speed | 1,500 rpm or less |
| Either of the following conditions is met: | (a) or (b) |
| (a) Following conditions are met: | 1 & 2 |
| 1. Engine speed | 500 rpm or less |
| 2. Battery voltage | 6 V or more |
| (b) Following conditions are met: | 1 & 2 |
| 1. Engine speed | More than 500 rpm |
| 2. Battery voltage | 10 V or more |