Front Passenger Seat Belt Warning Light: Inspection
- INSPECT TELLTALE LIGHT ASSEMBLY
- Check that the telltale light assembly (front passenger seat belt warning light) condition.
- Apply battery voltage to the connector according to the table below.
OK
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Specified Condition Battery positive (+) → E60-4 (B)
Battery negative (-) → E60-3 (L)Seat belt warning light comes on If the result is not specified, replace the telltale light assembly.
- Apply battery voltage to the connector according to the table below.
- Check that the telltale light assembly (front passenger seat belt warning light) condition.