LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix S, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (2ZR-FE)) >> Drive Belt >> Removal

Drive Belt: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 2 CYLINDER HEAD COVER  (See REMOVAL )
  2. REMOVE ENGINE UNDER COVER RH 
  3. REMOVE V-RIBBED BELT 
    1. Loosen bolts A and B.
    2. Loosen bolt C, then remove the V-ribbed belt.
    NOTE: Do not loosen bolt D.
scientia non olet · About LEMON Manuals