LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix S, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Starting System (2ZR-FE)) >> Starter >> Removal

Section 5 (Starting System (2ZR-FE)): Starter: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  3. REMOVE STARTER ASSEMBLY 
    1. Remove the terminal cap.
    2. Remove the nut and disconnect terminal 30.
    3. Disconnect the connector.
    4. Remove the 2 bolts and starter assembly.
      Fig 1: Locating Starter Assembly Bolts
      G06009601Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002