PCV Valve: Removal

REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See REMOVAL )
DISCONNECT NO. 2 VENTILATION HOSE
1. Disconnect the No. 2 ventilation hose from the ventilation valve sub-assembly.
REMOVE VENTILATION VALVE SUB-ASSEMBLY
HINT:

The ventilation valve sub-assembly is the PCV valve.

Fig 1: Locating No. 2 Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using a 22 mm deep socket wrench, remove the ventilation valve sub-assembly.
  
  Fig 2: Removing Ventilation Valve Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002