CANISTER (for 4WD): Removal

REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
1. Remove the 3 bolts, 2 nuts and No. 1 fuel tank protector sub-assembly.
REMOVE CHARCOAL CANISTER ASSEMBLY
1. Disconnect the purge line hose.
  
  Fig 1: Locating Purge Line Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the fuel tank vent hose from the charcoal canister.
3. Disconnect the charcoal canister filter sub-assembly from the charcoal canister.
4. Disconnect the fuel tank vent hose from the charcoal canister.
  
  Fig 2: Locating Fuel Tank Vent Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 3 bolts and charcoal canister assembly.
  
  Fig 3: Locating Charcoal Canister Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002