Meter / Gauge System: Initialization

HINT:

• The ODO/TRIP meter reset knob is located on the right side of the combination meter.
• This reset operation is required only for U.S.A..

1. Turn the ignition switch to ON.
2. Press the ODO/TRIP meter reset knob until the TRIP A meter appears.
3. Turn the ignition switch off.
4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP meter reset knob. Hold the ODO/TRIP meter reset knob until the following conditions are met and 5 seconds have passed.
   Fig 1: ODO/TRIP Meter Reset Knob Function Diagram

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   • The TRIP A meter shows "000000".
   • The master caution indicator light illuminates.
5. When "000000" disappears and the master caution indicator light turns off, the reset is complete.