Low Pitched Horn: Installation

INSTALL LOW PITCHED HORN ASSEMBLY
1. Connect the horn connector.
2. Install the horn with the bolt.
  Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
  
  Fig 1: Identifying Bolt And Horn
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL UPPER RADIATOR SUPPORT SEAL
1. Install the radiator support seal with the 7 clips.
  
  Fig 2: Identifying Clips And Radiator Support Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002