Propeller Shaft Assembly: Installation

INSTALL REAR PROPELLER SHAFT
1. Align the matchmarks on the propeller shaft flange and transfer flange.
2. Connect the propeller shaft with the 4 washers and 4 nuts.
  Torque: 88 N*m (900 kgf*cm, 65 ft.*lbf)
  
  Fig 1: Identifying Matchmarks On Propeller Shaft Flange And Transfer Flange
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Align the matchmarks on the propeller shaft flange and differential flange.
4. Install the propeller shaft with the 4 bolts, 4 washers and 4 nuts.
  Torque: 88 N*m (900 kgf*cm, 65 ft.*lbf)
  
  Fig 2: Aligning Matchmarks On Propeller Shaft Flange And Differential Flange
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSFER HEAT INSULATOR
1. Install the insulator with the 4 bolts.
  Torque: 30 N*m (306 kgf*cm, 22 ft.*lbf)
  
  Fig 3: Locating Insulator Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002