Front Propeller Shaft Assembly: Removal

REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH (See REMOVAL )
REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH (See DISASSEMBLY )
REMOVE NO. 1 ENGINE UNDER COVER SUBASSEMBLY (See REMOVAL )
REMOVE NO. 2 ENGINE UNDER COVER (See REMOVAL )
REMOVE PROPELLER SHAFT HEAT INSULATOR
1. Remove the 2 bolts and insulator.
  
  Fig 1: Locating Insulator Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT PROPELLER SHAFT ASSEMBLY
1. for Transfer Side:
  1. Place matchmarks on the propeller shaft flange and transfer flange.
  2. Remove the 4 nuts and 4 washers.
    
    Fig 2: Placing Matchmarks On Propeller Shaft Flange And Transfer Flange
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Differential Side:
  1. Place matchmarks on the propeller shaft flange and differential.
  2. Remove the 4 nuts and 4 washers.
3. Remove the front propeller shaft.
  
  Fig 3: Placing Matchmarks On Propeller Shaft Flange And Differential
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002