Hydraulic Brake Booster: Disposal

DISPOSE OF BRAKE BOOSTER ACCUMULATOR ASSEMBLY
1. Place the brake booster accumulator assembly in a vise and cover it with cloth.
2. Using a saw, cut the brake booster accumulator body between A and B as shown in the illustration to discharge the gas inside.
  
  Fig 1: Identifying Brake Booster Accumulator Body Cutting Gap Between A And B
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  CAUTION:
  - Cover with a piece of cloth when working because gas may blow out.
  - Cut the accumulator carefully, not abruptly.
  - Wear protective glasses.
3. When the outer body of the brake booster accumulator is cut, gas and liquid discharge.
  HINT:
  
  The gas is colorless, odorless and non-poisonous.