REAR STABILIZER BAR (for 2WD): Removal

REMOVE REAR WHEELS
REMOVE REAR STABILIZER LINK ASSEMBLY LH
1. Remove the nut and separate the rear stabilizer link assembly LH from the rear stabilizer bar.
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.
  
  Fig 1: Separating Rear Stabilizer Link Assembly LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut and the rear stabilizer link assembly LH from the rear shock absorber with coil spring LH.
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.
REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT:

Perform the same procedure as the LH side.

Fig 2: Separating Rear Stabilizer Link Assembly (2WD)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR STABILIZER BAR
1. Remove the 4 bolts and rear stabilizer bar.
Fig 3: Locating Rear Stabilizer Bar Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR NO. 1 STABILIZER BAR BRACKET (for LH Side)
1. Remove the rear No. 1 stabilizer bar bracket.
REMOVE REAR NO. 1 STABILIZER BAR BRACKET (for RH Side)
HINT:

Perform the same procedure as the LH side.

Fig 4: Identifying Rear No. 1 Stabilizer Bar Bracket LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR STABILIZER BUSHING (for LH Side)
1. Remove the rear stabilizer bushing.
REMOVE REAR STABILIZER BUSHING (for RH Side)
HINT:

Perform the same procedure as the LH side.

Fig 5: Identifying Rear No. 1 Stabilizer Bar Bracket RH