Front Shock Absorber: Disposal
- DISPOSE OF FRONT SHOCK ABSORBER
- Position the front shock absorber assembly level with the piston rod fully extended. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.NOTE:
- The gas is colorless, odorless, and nonpoisonous.
- Be careful when drilling because shards of metal may fly about, so always use the proper safety equipment.
- Position the front shock absorber assembly level with the piston rod fully extended. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.