Ignition Coil And Spark Plug: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE IGNITION COIL ASSEMBLY
1. Disconnect the 4 ignition coil assembly connectors.
2. Remove the 4 bolts and 4 ignition coil assemblies.
  
  Fig 1: Locating Ignition Coil Assemblies Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SPARK PLUG
1. Using a spark plug wrench, remove the 4 spark plugs.
Fig 2: Removing Spark Plug
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002