Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
- One of the Following Conditions is Met: Condition (A), (B) and (C)
Condition (A)
TYPICAL MALFUNCTION THRESHOLDS CHARTNumber of the following signal input at the same time 2 or more Park position switch ON Neutral position switch ON Park/neutral position switch ON R range position switch ON D range position switch ON Condition (B)
TYPICAL MALFUNCTION THRESHOLDS CHART"S" switch ON Condition (C)
TYPICAL MALFUNCTION THRESHOLDS CHARTAll of the following conditions are met - Park position switch OFF Neutral position switch OFF Park neutral position switch OFF R range position switch OFF D range position switch OFF