Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
All
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | None |
| Ignition switch | ON |
| Battery voltage | 10.5 V or more |
| Starter | OFF |
Condition (B)
TYPICAL ENABLING CONDITIONS CHART
| One of the following conditions is met: | Condition (a), (b), (c) or (d) |
| (a) Park/neutral position switch | ON |
| (b) Park position switch | ON |
| (c) Neutral position switch | ON |
| (d) R range position switch | ON |