Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
TYPICAL MALFUNCTION THRESHOLDS CHART
| One of following conditions met | - |
| A. All of following conditions met | - |
| Battery voltage | 11 to 13 V |
| Target duty ratio | Less than 70% |
| Output signal duty ratio | 100% or more |
| B. All of following conditions met | - |
| Battery voltage | 13 V or more |
| Target duty ratio | Less than 80% |
| Current cut status | Not cut |
| Output signal duty | 3% or less |