Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
TYPICAL ENABLING CONDITIONS CHART
| All of the following conditions are met | - |
| Starter | OFF |
| Ignition switch | ON |
| Time after ignition switch OFF to ON | 0.5 seconds or more |
| One of the following conditions is met | - |
| A. All of the following conditions are met | - |
| (a). Battery voltage | 13 to 11 V |
| (b). CPU commanded Duty | 70% or more |
| (c). Current cut status | Not cut |
| B. All of the following conditions are met | - |
| (a). Battery voltage | 13 V or more |
| (b). CPU commanded Duty | 80% |
| (c). Current cut status | Not cut |