Air Fuel Ratio Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE NO. 1 ENGINE UNDER COVER
REMOVE AIR FUEL RATIO SENSOR
1. Disconnect the air fuel ratio sensor connector.
  
  Fig 1: Locating Air Fuel Ratio Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the air fuel ratio sensor from the exhaust manifold.
  SST 09224-00010
  
  Fig 2: Removing Air Fuel Ratio Sensor From Exhaust Manifold
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002