LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Fuel System (1AR-FE)) >> Fuel Sender Gauge Assembly >> Removal

Fuel Sender Gauge Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 
    1. Remove the fuel suction tube assembly with pump and gauge (See REMOVAL ).
  2. REMOVE FUEL SENDER GAUGE ASSEMBLY 
    1. Disconnect the connector and remove the fuel sender gauge from the fuel suction tube.
    Fig 1: Removing Fuel Sender Gauge From Fuel Suction Tube
    G06113126Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals