FRONT DRIVE SHAFT (for 1AR-FE): Inspection

1. Check that there is no excessive play in the outboard joint.
2. Check that the inboard joint slides smoothly in the thrust direction.
3. Check that there is no excessive play in the radial direction of the inboard joint.
4. Check the boots for damage.
   Fig 1: Inspecting Front Drive Shaft Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Check whether the dimensions (A) of the front drive shaft assembly are within the following specifications.

Fig 2: Identifying Dimensions Of Front Drive Shaft Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Dimension (A)